Operating Mode; Selectrix 1 (Sx1) 2; Features; Configuration Options - BRAWA Gravita 10 BB Betriebsanleitung

6. Operating mode

SelecTRIX 1 (SX1)

6.1 Features

• Speed steps 31
• Speed steps (internal) 127
• Light front / rear
• Additional features 2
• Additional channel shiftable
• (Locomotive + 1) with 8
functions

6.2 Configuration options

All parameters of the locomoti-
ve can be changed as often as
desired by programming. For
information to program, read
the manual of your programmer.
Basic settings
Address 3 (DCC)
Address 1 (SX1)

6.3 Operation

Place the locomotive on the
programming track and read
out the settings of the decoder.
The default setting should be
01-542. Program the desired
locomotive address and take
the train with these setting into
operation. After the first check,
you can adjust the parameters
of the engine to your needs.
4

7. Operation form DCC

7.1 Features
• Short addresses 1 – 127
• Long addresses
0001 - 9999
• Speed steps 14, 28, 126
• Speed steps (internal) 127
• Light front / rear (dimmable)
• Operation with brake diodes
yes
• Operation with brake gene-
rators yes
• Multiple traction yes
• Full NMRA compliant yes
• Main track programming
yes
Function classification:
F0 Light
F1 Driving noise
F2 Horn 1
(as long as pressed)
F3 Horn 2
(as long as pressed)
F4 Shunting
F5 Closing sound
Cab door
F6 Light off front
F7 Squealing brakes
(manual)
F8 Light off back
F9 Low beam
F10 –
F11 Horn (long) 1
F12 Horn (long) 2
F13 Horn 1 (short)
F14 Horn 2 (short)
F15 Release noise brake
(manual)
F16 Fade
Twice white light on both sides
can switched with F0 (Light) on,
F6 on and F8 on.
Twice red light on both sides,
can switched with F0 (light) off,
F6 on and F8 on.
5