Description Of The Controls - AEG EC 4829 Bedienungsanleitung, Garantie

English
36
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
After successful registration, a beep will sound and the PAIR
indicator lamp will light up. For the further procedure, please
refer to the user manual of the playback unit. If possible,
adjust the volume of the external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. The sound
however is not played back via the speaker. After you
have ended the call, the devices are connected to each
other again and playback continues.
USB port (9)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Connect a USB storage device directly into the port.
2. Select the USB port with the FUNC./LIGHT button (- 1 -).
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
controls".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.

Description of the controls

NOTE:
Depending on your playback unit, not all functions might
be supported.
/PAIR/ (12)
• You can pause and continue music playback. Press again
to continue playback.
• Hold the button depressed in Bluetooth mode to discon-
nect an existing Bluetooth connection.
• To reactivate the device after the device has turned itself
off after 15 minutes with a too weak or no signal.
(11)
Press 1 x = Restart of the song from the beginning. (Not
during USB-mode)
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song.
When you hold down the button in USB mode, a music
search is started.
(13)
Press to skip to the next song and the following songs.
When you hold down the button in USB mode, a music
search is started.
Cleaning
CAUTION:
Do not submerge the device in water.
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter-
gents.
Troubleshooting
Fault Cause
Unit cannot Unit crashes and
be operated. "hangs".
No audio Speaker is not paired
signal via the to the audio source.
Bluetooth
connection.
Volume too low.
Solution
Disconnect from the
mains for around
5 seconds. Then
switch the unit on
again.
Check whether a
connection exists. If
necessary, pair the
speaker again to the
audio source.
Increase the volume
on the speaker.
Increase the volume
on the audio source.