Packing List; Diagram - Segway Ninebot ES1 Benutzerhandbuch

2 Packing List

Handle
User Materials
USER MANUAL QUICK START LIMITED WARRANTY
Second Battery Pack
ES1 ES2
Sold separately Included
Accessories
M4 Flathead Screw x 5 M4 Hex Wrench
(one extra)
When unboxing your KickScooter, please verify that the above items are included in the package. If you are missing any components,
please contact your dealer/distributor or nearest service center (see contacts in the user manual). After verifying that all components are
present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power off your KickScooter and unplug the charge cable before assembling, mounting accessories, or cleaning the
mainframe.
04
Mainframe
ES4
Battery Charger

3 Diagram

Electronic throttle
Dashboard & Power button
Electronic brake
Headlight
Folding latch
Stem (battery cabin)
Charge port
Second battery port
Hub motor
Dashboard & Power Button
Speedometer: Indicates the current speed. Also displays error codes when faults are detected.
Power level: Indicates the remaining battery level with 5 bars. Each bar equates to approximately 20% power level.
Power mode (double click the power button to switch the mode):
—Red "S" icon: Sport mode (maximum power/speed and reduced range).
—White "S" icon: Standard mode (moderate power/speed and range).
—No "S" icon: Speed limit mode (minimum power/speed and increased range).
Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon indicates that the vehicle is
connected to a mobile device.
Power button: Short press to power on. Long press to power off. When powered on, single click to turn on/off the headlight. Double-click to
change power mode.
Speedometer
Power mode
Bluetooth
Power level
Power button
(multi-functional)
Folding pedal
Rear fender/foot brake
Kickstand
05