Asus RP-AC56 Schnellstartanleitung Seite 11

Q7: When I connect a speaker or stereo system to RP-AC56, there is no sound coming out when I play audio
files.
• M ake sure that you have not turned off the audio output via the touch controller. The touch controller is set to turn on/off the
night light and mute/unmute the audio by default. You can log into the Range Extender's Web GUI to change the settings.
Q8: I cannot access the web GUI to configure the RP-AC56 settings.
• Close all running web browsers and launch again.
• Follow the steps below to configure your computer settings based on its
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click Start > Internet Explorer to launch the web browser.
2. Click Tools > Internet options > Connections tab > LAN settings.
3. From the Local Area Network (LAN) Settings screen, untick Use a proxy server for your LAN.
4. Click OK when done.
B. Set the TCP/IP settings to automatically obtain an IP address.
1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
network connections.
2. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
3. Tick Obtain an IP address automatically.
4. Click OK when done.
11