First Use - Medion AKOYA E6234 Bedienungsanleitung

5.

First Use

To operate your Notebook safety and ensure a long service life, you should read the
"Operational safety" chapter at the beginning of this manual. All operating software
is already fully preinstalled on the Notebook so there is no need for you to install
any more drivers and you can get started right away.
 Before starting, insert the battery by placing it into the compartment until it
clicks into place. Be sure to fasten the battery compartment to prevent the
battery falling out.
 Connect the supplied mains adapter to the Notebook (15). Next, connect the
power cable to the adapter and then plug it into a mains socket. Move the
switch on the mains adapter (optional) to position I to power the Notebook and
charge the battery. Set this switch to 0 to stop the power supply.
 Open up the display to the desired position using your thumb and forefinger.
The display should not be folded back by more than 120°. Always hold the dis-
play firmly by the middle when folding it back, adjusting the position and clos-
ing it. Failure to do so may damage the display. Never use force to open the dis-
play.
PLEASE NOTE!
When first operating your Notebook please ensure that the battery is insert-
ed and the mains adapter is connected. This is required for Windows® 8 to
correctly work out the Windows® 8 performance index.
ES
EN
DE
17 of 72