Switching The Alarm Beep On And Off; Temperature Scale - Wohler CDL 210 Bedienungsanleitung

Setup
6.5 Switching the
alarm beep on
and off
6.6 Temperature
scale
Fig. 11: Display P2.0-mode
Fig. 12: Selecting the temperature
46
In the P 1.4 mode the alarm beep can be switched
on and off.

Select ON to activate the alarm beep.

Select OFF to deactivate the alarm beep.

Press SET to save the setting.
Select the temperature unit in P2.0 mode. Go
from normal mode to 2.0 mode by doing the fol-
lowing steps:

Press and hold SET in normal mode for three
seconds to enter P1.0 mode.

Press LOG/▲ in P1.0 mode to enter P2.0
mode (see Fig. 11).

Press SET to enter P2.1 mode for setting the
actual temperature unit with the actual unit °C
or °F blinking (Fig. 12)

Press LOG/▲ or MIN/MAX▼ key to change
from °C to °F.

Press SET to save the settings or press ESC
to return to P2.0 mode without saving.