PeakTech 3440 Bedienungsanleitung Seite 107

7.2 Meter Info
The Meter Info selection lists the serial number, firmware version,
are displayed.
Open the Save-menu by pressing the push button "F3" (SAVE) and
with the push button "F3" (DOWN) select the menu-point "SETUP"
and after that "METER INFO" and confirm it with the push button
"F1" (ENTER).
7.3 Setting Format
Open the Save-menu by pressing the push button "F3" (SAVE).
Press the push button "F3" (DOWN) to select the menu item
"SETUP" and after that "FORMAT" and confirm it with the push
button "F1" (ENTER).
With the push buttons "F2" (UP) and "F3" (DOWN) choose between
the menu items Beeper, Numeric Format, Date Format and Time
Format
Press the push button "F1" (EDIT) to select the respective menu
item.
-106-