switel DC62 serie Bedienungsanleitung Seite 97

Charging the batteries
Before the handset is used for the first time, insert it in the base station/char-
ging station for at least 16 hours.
[When the handset is correctly inserted in the base station / charging station, an acous-
tic signal issued.] [When the handset is correctly inserted in the base station / charging
station, the charge control lamp lights up.] The handset warms up during the charging
process. This is normal and does not represent a risk. Do not charge the handset with
charging units from other manufacturers. The current battery charge status is indi-
cated in the display:
Full
Setting the display language
Select the required language (also refer to Menu Structure"):
” > MOBILTEIL > SPRACHE >...
(” > HS SETTINGS > LANGUAGE >...)
The German, French, Italian and English languages are available for selection.
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 103 for the sequence of menu
option selections.
Automatic answering
If the Auto Talk function is activated, an incoming call is taken when the handset is re-
moved from the base station. The automatic answering function is activated and deacti-
vated using the menu. Refer to Page 104 for the sequence of menu option selections.
Private branch exchanges
The information on Page 114 explains how to install your telephone in a private branch
exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT
cordless telephones when in Standby mode when the handset is in the
base station.
In talk mode, radiation is reduced (depending on the distance between the handset and
base station).
Preparing the Telephone
60
Half empty Low Empty
97