Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation:
•
Plug the receiver to an electric outlet. The green LED shows that the device is on.
•
Position the two antennae vertically and make sure that the receiver is free-standing.
•
Connect the receiver with its XLR-output to an amplifier or a mixer as intermediary.
Volume Adjustment:
•
To adjust the audio output level of the receiver to the sequencing amplifier uses the volume controls. Is
the level too high the sound is distort. If the level is too low the sound is noisy.
The Microphone Charger:
•
It is recommended to use the built-in charger for charging the accumulators of the microphones.
•
For this purpose the microphones must be inserted into the sockets on the receiver.
•
During the microphones get charged the LED at the receiver shows. The LED will go off when the
charging is completed.
P2008 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
867-210
Werbung
