Manual: Laserworld GS-80RG LED
ROTATION:
The term „ROTATION" stands for the rotation function of the laser output. Press the button several times
for changing the speed of the rotation you need to press the button several times until it stops. When
pushing it again, the rotation starts again very slowly.
LASER FLASH:
The Laserworld Garden Star GS-80RG LED offers a flash feature for LED as well as for laser output. Pushing
the button „LASER FLASH" makes the laser output stop and start again after a few seconds. With the
same button you can speed up the flash feature until it reaches the fastest level. The FLASH speed can be
adjusted by pressing the button several times.
LED FLASH:
The Laserworld Garden Star GS-80RG LED offers a flash function for LED as well as for laser output. Push
the button „LED FLASH" once (with LED selected ON) light starts to flash.
By pressing the „LED FLASH" button multiple times the flash frequency can be increased It's possible to
make both LED & LASER flash at the same time by pressing the respective buttons.
AUTOMATIC COLOR LED & LASER
When pressing the button, colors of LED & LASER are changing and the different color automatically
cycle through. It just works if both the LASER and LED output is selected on
LASER COLOR
When pushing the green „LASER COLOR" button on the right upper corner of the remote control, the
colors of the laser output change. Press the button several times to select the desired mode: single green,
single red or red and green mode.
LED COLOR
The laser uni is equipped with multi color LEDs. With using the LED COLOR button, the output power of
the LED's can be selected. Press it several times to choose the desired color.
7. Service notes
•
Quick on/off switching of this device can
dramatically reduce lifetime of the laser
diode.
•
Avoid sharp knocks and shocks to this de-
vice and ensure sufficient protection during
transportation. Look after your Laserworld
product.
•
Disconnect the device from mains when it
is not needed.
English
.
•
The devices of the Garden Series are not
meant for professional applications.
•
Damages on the device caused by im-
proper handling, neglect of the safety
instructions and service notes will void
warranty.