Overload Protection; Safety Systems; Overview - Bosch MMB43 serie Gebrauchsanleitung

en

Safety systems

Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our web page.
Contents
Intended use . ............................................14
Important safety information .....................14
Safety systems .........................................16
Overview...................................................16
Operation . .................................................17
Cleaning and servicing .............................19
Troubleshooting . .......................................20
Recipes.....................................................20
Disposal . ...................................................23
Guarantee.................................................23
Safety systems
Start lock-out
The appliance cannot be switched on until
the blender jug has been turned firmly into
place.
Automatic disconnection
The appliance switches off automatically
if the blender jug accidentally becomes
detached during operation.

Overload protection

If the motor switches itself off while the
appliance is being used, the overload pro-
tection feature has been activated. Possible
causes:
- very large amounts of ingredients,
- appliance operated too long.
If a safety system is activated, see
"Troubleshooting".
16

Overview

Please fold out the illustrated pages.
1 Motor block
2 Rotary switch with illuminated ring
The illuminated ring flashes slowly when
the appliance is ready for use (on).
The illuminated ring is lit continuously
when the appliance is in operation.
Rapid flashing signals a fault (see
"Troubleshooting").
a MMB43.. :
0/off = Stop
on = Appliance switched on
1 = Lowest operating speed
5 = Highest operating speed
b MMB64.. :
0/off = Stop
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
Q = pulse circuit at maximum
speed, hold down switch for required
duration
c MMB65.. :
0/off = Stop
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
3 Quick-selection buttons
Preset buttons for optimum results.
For some models:
T = f or crushing ice cubes (crushed
ice). Press button 1x briefly.
U
= F or making mixed drinks
and smoothies. Press button
1x briefly.
For an even more delicate
result, press the button a
second time.
V = F or cutting ingredients in the
universal cutter. Press button
1x briefly.
Q = P ulse circuit at maximum
speed. Hold down button for
required duration.
Pay attention to Figure G !