Before First Use; Unpacking; Power Supply; Battery Operation - WATSON RP5900 Bedienungsanleitung

Side view right
21
22
3. BEFOrE FIrST uSE

3.1 unpacking

Remove all packaging.
Check for the presence of all parts and for transport damage. In case of damage or incomplete
delivery, please contact your dealer (
Please keep the packaging. The appliance can be stored in it if it is not used for a longer period of
time.
Place the appliance on a level, stable, clean and dry surface.
Ensure that there is sufficient ventilation. Keep a minimum distance of 10 cm between the product and
other objects or walls.
3.2 power supply
The appliance can either be powered via a wall outlet or by batteries.
Insert the power cable into the AC-IN ~ (12) inlet at the back of the appliance. Connect the power
plug to a suitable wall outlet. Make sure that the power supply voltage is the same as needed for the
appliance.
3.3 Battery operation
Disconnect the power plug from the wall outlet before opening the battery compartment and inserting
the batteries.
Open the battery compartment at the bottom of the appliance.
Insert 6 batteries (1.5 V
inside the battery compartment and on the batteries.
21
22
TuNING control
Detachable power cord
Guarantee).
1.
3.
, type LR14 / R14 / C) (not supplied) according to the polarity markings
7
2.