System Initialization; Setup Wizard - Digitus DN-16150 Kurzanleitung Zur Installation

Local Display with HDMI or
VGA monitor
DC12V input
power supply

3.1 System Initialization

On the local display with the VGA or HDMI monitor, after connecting the power cable of the
NVR to a wall outlet and pressing the power button, you will see on screen that the NVR
system is initializing, as shown below.

3.2 Setup Wizard

After NVR start-up is completed, enter "admin" for both login and password to login. The
"Setup Wizard" will be displayed. Follow the "Setup Wizard" to guide you through the first time
installation.
Chapter 3 NVR Boot Up
USB mouse for local
control and configuration
4