Motion Detection Settings - Conrad 75 16 16 Bedienungsanleitung

Note that the pairing function assigns the paired camera to the
respective camera channel. The camera previously assigned to
that channel is deleted.
5) When pairing is successful, the camera feed is automatically displayed in the
camera window.
6) Click on the signal strength/alarm indicator to check if the camera is installed in a
place with good transmitting conditions.
7) The camera display window shows the camera feed.
8) Click on the SAVE button to save the settings.

13. Motion detection settings

1) Click on the "Security Setup" icon
right.
2) Click on "Motion Sensor" in the settings sub-menu.
3) Set the desired sensitivity level between 0 - 100. Small objects or objects moving
at a great distance, such as birds, are not detected when the sensitivity level is
low. Big or closer moving objects, such as people passing by, can be detected
when the sensitivity level is increased.
68
to activate the settings windows on the