Silvercrest SMPS 7 A1 Bedienungsanleitung Seite 14

■ Felt cone
11
For smoothing and polishing nail edges after fi ling, and for cleaning
the nail surface.
♦ Use the felt cone
and to clean the nail surface after grinding. Always polish in a
circular motion and never let the felt cone
■ Sapphire disc
For fi ling and working the nails.
WARNING – RISK OF INJURY!
Excessive speeds and applying too much pressure,
can cause the sapphire disc to rapidly penetrate
into deeper, healthy skin layers.
This can cause injuries and damage to the periosteum!
► Always take care when removing corns. If in doubt, consult a
pedicurist, podologist or dermatologist.
Work the edge of the nail using the sapphire disc
the inner disc rotates and the outer edge does not move, you can fi le
your nails accurately without damaging your skin with the rapidly
rotating disc.
♦ Always work from the outside of the nail to the tip.
■ Cylindrical miller
For grinding off thick toenail surfaces and rough smoothing of the
surfaces.
You can use the cylinder miller
♦ Always hold the cylinder miller
and use light pressure and circular movements to grind off the
surface.
SMPS 7 A1
:
to polish and smooth the edge of the nail
11
/ :
12 13
:
14
stay in one place.
11
12
to grind off thick nail surfaces.
14
parallel to the nail surface
14
. Since only
/ 13
11
GB
IE