BEDIENUNGSANLEITUNG Premium Switch 4 IN 1 Out | 3D Einführung Wir beglückwünschen Sie zum Erwerb der in-akustik Premium Switch Box 3D. Wir legen Wert darauf, dass Sie mit Ihrem Kauf zufrieden sind. Unsere Switch Box wurde entwickelt, um Ihnen den Umgang mit Ihren ®...
BEDIENUNGSANLEITUNG Vereinfachte EU-Konformitätserklärung Hiermit erklärt die in-akustik GmbH & Co. KG, dass dieses Gerät der Niederspannungs-Richtlinie 2014/35/EU, der EMV Richtline 2004/108/EG und der RoHS Richtlinie 2011/65/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.in-akustik.com Sonstige Hinweise Angaben ohne Gewähr.
Seite 4
BEDIENUNGSANLEITUNG Befolgen Sie die nachstehenden Betriebsanweisungen und überprüfen Sie, ob alle Betriebsfunktionen die CEC-Steuerungsfunktion beinhalten (Routingänderung, One Touch Play, Standby). Arbeitet eine der Funktionen nicht, starten Sie die Switch Box neu und führen Sie Schritt 5 erneut aus. Hinweis: Durch das Initiieren der CEC-Kommunikation wird gewährleistet, dass die Switch Box die korrekten EDID Daten vom Quellgerät und vom Anzeigegerät aufnimmt.
Seite 5
BEDIENUNGSANLEITUNG Wenn Sie andere, an die Switch Box angeschlossene (CEC-unterstützte) HDMI Quellgeräte einschalten und abspielen, ändert die Switch Box die Eingangsquelle auf das neue aktive Gerät. (Routing Control) Schalten Sie das (CEC-unterstützte) TV-Gerät aus (Standby). Die Switch Box und alle Quellgeräte schalten in den Standby-Modus.
BEDIENUNGSANLEITUNG Fehlerbehebung Wenn kein Bild angezeigt wird, prüfen Sie bitte Folgendes: Vergewissern Sie sich, dass die Direktverbindung vom Quellgerät zum Anzeigegerät ohne die HDMI- Switch Box funktioniert. Überprüfen Sie alle Anschlüsse und Stecker. Vergewissern Sie sich, dass das Anschlusskabel unbeschädigt ist. ...
Seite 7
OPERATION MANUAL Premium Switch 4 IN 1 Out | 3D Introduction Congratulations on your purchase of the in-akustik Premium Switcher. Your satisfaction is very important to us. Our series of Switchers are designed to make the use of your HDTV equipment more comfortable. The in-akustik Premium Switcher can expand HDMI input of your HDMI display device up to 4 HDMI inputs.
Seite 8
OPERATION MANUAL Simplified EU declaration of conformity Hereby, in-akustik GmbH & Co. KG declares that this device is in compliance with directive low voltage 2014/35/EU; EMV 2004/108/EG and RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: www.in-akustik.com MISC Indication without guarantee.
Seite 9
OPERATION MANUAL Follow the operational instruction below, and try all the operation function include CEC control function (Routing Change, One Touch play, Standby) If any function cannot work, please restart the switcher and perform Step 5 again. Note: 1. Initiate the CEC communication can make sure the switcher collect the correct EDID information from source device and display device.
Seite 10
OPERATION MANUAL Power on and play other HDMI source devices (CEC supported) which is connected to the switch box, the switcher will change the input source to the newly active device. (Routing Control) Power off (standby) the TV (CEC supported). The switcher and all source devices will turn to standby mode.
OPERATION MANUAL Trouble shooting When there is no picture presented, please: Make sure the direct connection from the source device to the display device without the HDMI Switcher is working. Check all connectors connect well or not. Check the connecting cable is damaged or not. ...