Delivery Scope And Transport Inspection; Setup Location Requirements; Unpacking; Disposal Of The Packaging - Caso 2770 Original Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

13.2

Delivery scope and transport inspection

As a rule, the Egg Boiler is delivered with the following components:

 Egg boiler

 Lid

 Egg tray

 Measuring cup with egg piercer

 Operating Instructions

► Examine the shipment for its completeness and for any visible damages.

► Immediately notify the carrier, the insurance and the supplier about any incomplete

shipment or damages as a result of inadequate packaging or due to transportation.

13.3

In order to ensure the safe and trouble-free operation of the device, the setup location

must fulfil the following prerequisites:

 The device must be set up on a firm, flat, horizontal and water-resistant surface with

sufficient load-bearing capacity for the air humidifier and content.

 Choose the setup location in such a way that children cannot reach the device.

 The device is not intended to be installed in a wall or a built-in cupboard.

 Do not set up the device in a hot, wet or extremely damp environment or near

flammable material.

 Do not cover up any openings on the device and do not block these off.

 The electrical socket must be easily accessible so that the power lead can be

disconnected easily, in the case of an emergency.

 The installation and assembly of this device in non-stationary setup locations (e.g. on

ships) must be carried out by specialist companies / electricians, provided they

guarantee the prerequisites for the safe use of this device.

13.4

 Remove the device out of the carton, remove the packaging material, shovel and

measuring container.

13.5

The packaging protects the device against damages during transit. The packaging

materials are selected in accordance with environmentally compatible and recycling-

related points of view and can therefore be recycled.

caso Eierkocher

Please note

Inhaltsverzeichnis