Ducting Hood Without Motor With Servo Controlled Front Panel; Ducting Space; Electrical Connection; Installation - Zanussi ZHI 611 Handbuch Für Installation, Bedienung Und Wartung

○ ○ ○ ○ ○ ○ ○ ○ ○
ducting hood without motor
WITH SERVO CONTROLLED FRONT PANEL
Traditional type of ducting hood for mounting on a wall or under an
overhead unit.
This ducting hood has a light switch and a panel with electronic servo
controls.
It takes about 20 seconds for the panel to open and about 50 seconds
to close.
Colours available: white, brown and grey.
Integrated ducting hood without motor.
This ducting hood has a light switch and a panel with electronic servo
controls.
It takes about 20 seconds for the panel to open and about 50 seconds
to close.
Colours available: white, brown and grey.
The ducting hood has two lights, each max. 40 Watts (E14 connector).

Ducting space

When installing a ducting hood without a motor, it is necessary to take into account the
ducting space required for proper operation. The ducting space can be created by providing
a dedicated ducting outlet, at ceiling height, or with a T junction on the exhaust pipe.
Thus, when the hood is closed the ducting space remains unvaried.

Electrical connection

The ducting hood is supplied complete with power cable and plug. Electrical connection
of the hood must be to a properly earthed power socket.

Installation

To facilitate installation, the hood has a clear template to be used for marking the holes.
Optimal efficiency is obtained if a 125 mm diameter ventilation channel is used.
4
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
902
102 - 35
GB
○ ○ ○ ○ ○ ○
○