Refilling the water tank
1. Always disconnect the mains plug before refilling water.
2. Set the steam control to the " " position.
3. Place the iron with the sole plate in an upright position on a
heat resistant surface.
4. Open the lid of the refill inlet and carefully pour in the water.
5. Do not exceed the maximum line as marked on the water
reservoir.
6. Close the lid of the tank.
Self-Cleaning
1. Half fill the water tank with water.
2. Heat the machine up to its maximum temperature. After the
control lamp goes off remove the machine from the mains
supply.
3. Now hold the iron horizontally over a sink. Press and hold
the SELF-CLEAN button (8). Now rock the device back-
wards and forwards until the tank is empty.
4. Place the machine back on its stand and heat it up again.
To clean the base now iron over a clean cotton cloth.
When you have finished
•
Always turn the temperature control to "MIN" after use and
remove the mains plug (The control lamp goes off).
•
Empty the water tank in order to prevent the contents of the
tank leaking.
•
Allow the device to cool down before you put it away.
Cleaning
WARNING:
•
Always remove the mains lead before cleaning!
•
Wait until the machine has cooled down completely!
•
Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might
result in an electric shock or fire.
CAUTION:
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
•
Clean the casing with a slightly damp cloth.
•
Clean the sole plate and the rest with a slightly damp cloth.
Technical Data
Model: ..............................................................................DB 3485
Power supply: ............................................. 220 -240 V, 50/60 Hz
Power consumption: ..............................................1850 - 2200 W
Protection class: ........................................................................... I
Net weight: ........................................................... approx. 0.85 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed
of can be obtained from your local authority.
29