Installation Rules - Elvox 7529 Technisches Handbuch

Programming with SAVEPROG software
SaveProg is a PC software package supplied together with interfaces 692I
and 692I/U. These interfaces allow the PC to be connected to an entrance
panel or other suitable device, type 692I via an RS232 port and type 692I/U
via a USB connection.
After connecting the interface and installing SaveProg, on opening the pro-
gram the following window appears.
It is now possible to proceed with programming in two different ways:
1) with virtual 950C: clicking on icon
t950C programmer, which allows programming to be performed by si-
mulating use of the 950C programmer.
2) with the SaveProg windows: clicking on icon
configuration" window.
It is now possible to change button programming, create groups, select
ringtone types, adjust ringtone volume and enable or disable functions.
On completing the desired settings:
- save by clicking on .
- transfer the program to the device by clicking on the icon
The device has now been reprogrammed.
GB
opens an interactive image of
opens the "Device
.

INSTALLATION RULES.

Installation should be carried out observing current installation regulations
for electrical systems in the Country where the products are installed.
CONFORMITY.
EMC directive
Standards EN 61000-6-1, EN 61000-6-3.
INFORMATION FOR USERS UNDER DIRECTIVE 2002/96
(WEEE)
In order to avoid damage to the environment and human health as
well as any administrative sanctions, any appliance marked with
this symbol must be disposed of separately from municipal waste, that is it
must be reconsigned to the dealer upon purchase of a new one. Applianc-
es marked with the crossed out wheelie bin symbol must be collected in
accordance with the instructions issued by the local authorities responsible
for waste disposal.
Product is according to EC Directive 2004/108/EC and following
norms.
17