JUMO DICON touch Kurzanleitung Seite 97

Connection
Two solid state relays
AC 230 V, 1 A
(for controlling the left and
right-hand motor actuators,
galvanically isolated)
1
Combining a mains voltage circuit with a protective low-voltage circuit on the "dual normally open contact" option is
not admissible.
2
PhotoMOS is a registered trademark of Panasonic Corporation.
4.3.9 Digital outputs
Standard
Two relay outputs (changeover contact)
Switching capacity AC
Switching capacity DC
Contact life
Per optional board
One relay output (changeover contact)
Switching capacity AC
Switching capacity DC
Contact life
Two relay outputs (N/O contact)
Switching capacity AC
Switching capacity DC
Contact life
One solid state relay
Switching capacity
Protection circuitry
Two solid state relay for motor actuators
Switching capacity
Protection circuitry
One logic output
(voltage supply for transmitter)
Two logic outputs
Two PhotoMOS® relays
(Connection
element)
Output
AC 230V/24V; 3(0,5) A; cosφ=1(≥ 0,6); D300
DC 24V; 3(0,5; τ =7ms) A
250,000 operations at nominal load
AC 230V/24V; 3(0,5) A; cosφ=1(≥ 0,6); D300
DC 24V; 3(0,5; τ =7ms) A
250,000 operations at nominal load
1
AC 230V/24V; 3(0,5) A; cosφ=1(≥ 0,6); D300
DC 24V; 3(0,5; τ =7ms) A
250,000 operations at nominal load
1 A at AC 230 V, resistive load
Varistor
1 A at AC 230 V,
RC combination
DC 0/22 V, max. 30 mA (short-circuit proof)
DC 0/12 V max. 20 mA (short-circuit proof, not galvanically isolated)
2
DC 45 V, max. 200 mA, (galvanically isolated from each other, not
short-circuit proof)
AC 30 V, max. 200 mA, (galvanically isolated from each other, not
short-circuit proof)
4 Electrical connection
Symbol and terminal designation
29