Westfalia TD8501 Bedienungsanleitung Seite 16

Always use suitable saw blades with correct arbour holes and sanding paper
pads with correct size.
Never use a damaged or incorrect blade washer or tool retaining bolt. The
included blade washer and tool retaining bolt where specially designed for
this multi tool, for optimum performance and safety of operation.
Do not immerse the multi tool, the charger or the battery in liquids.
Make sure the sanding paper pad is correctly in place before switching on the
machine.
Avoid touching moving parts while working. There is danger of injury!
Never sand materials containing asbestos. Wear personal protection
and protective goggles.
Please note that poisonous dust may be emitted while removing
paint. Use suitable inhalation protection and ensure adequate venti-
lation.
If you connect a vacuum cleaner on the multi tool, make sure the
parts are connected and used correctly. Using such equipment
reduces hazards from dust.
Do not work with moistened materials as wallpapers or in damp areas. Do not
soak surfaces, you want to work on, with liquids containing solvents. Due to
scrapping, the heating of the material can cause toxic fumes.
Secure the work piece e.g. by chucking it in a parallel vice. Hold the machine
with both hands and take care of a firm footing.
Please observe that the multi tool and the used blades or sanding pads warm
up when using them for a long time. Do not overload the multi tool and allow
cooling down.
Should the multi tool become damaged do not use it and have it repaired by a
professional or contact our customer support department. Do not disassemble
the unit or try repairing it yourself.
Rechargeable Batteries do not belong in the
household garbage.
For battery disposal please check with your
local council.
Safety Notes
11