Special Features - HPI Racing reactor 500 Betriebsanleitung

Special Features

Optimized operating software
The Reactor 500 features an AUTO detection function that sets the feeding current during charging
and discharging. This can prevent overcharging, especially for lithium cells, which may lead to
battery failure. If any malfunction is detected an alarm will sound and the charger will automatically
disconnect the charging circuit. All the programs are monitored in this way to achieve maximum
safety and minimize failure. All the internal settings can be configured by the user.
Internal independent lithium battery balancer
The Reactor 500 employs an individual cell voltage balancer. This means it is not necessary to use
an external balancing system
Balancing individual cells battery discharging
While discharging the Reactor 500 can monitor and balance each cell on the battery individually. If
during discharging it detects any abnormal cell voltages it will automatically stop and inform you.
Adaptable to various types of lithium battery
All types of lithium cells are covered with charge options for Li-ion, LiPo and LiFe series cells
Fast and storage mode for lithium battery
There are two charge modes for your lithium cells. 'Fast' is the normal charge mode for everyday
use.'Store' mode allows you to preset the voltage cut off of the charge process at a low level. This is
ideal for storing your lithium cells
Processing time limit
A user programmable maximum time limit can be set to aviod any possible defect.
2