Alarmbehandlung - ABB FEX300 Schnittstellenbeschreibung

5

Alarmbehandlung

5.1 Field Diagnostics Profile
Die Alarmbehandlung ist an die FF Spezifikation FF-912: „Field Diagnostics Profile" angelehnt,
erfüllt diese jedoch nicht vollständig. Das folgende Diagramm zeigt den Ablauf:
DIAG_MASK_MAINTENANCE, DIAG_MASK_CHECK_FUNKTION; DIAG_MASK_OFF_SPECIFICATION,
DIAG_MASK_MIN_ALARM, DIAG_MASK_MAX_ALARM, DIAG_MASK_OVERFLOW_103,
Manufactuer Specific Condition
(32 Bit, internal value)
& FD_FAIL_MAP
FD_FAIL_ACTIVE (32 Bit)
Abb. 16:
COM/FEX300/FEX500/FF-DE
FEX 300 active Alarm Conditions (48 Bit)
DIAG_MASK_EMPTY_PIPE, DIAG_MASK_TFE
& detailsConditionMaintenanceMask =
manufacturerSpecificConditionMaintenaceSummary
& detailsConditionCheckFunctionMask =
manufacturerSpecificConditionCheckFunctionSummary
& FD_CHECK_MAP
& FD_MAINT_MAP
&FD_OFFSPEC_MAP
FD_OFFSPEC_ACTIVE (32 Bit)
FEX300, FEX500
masked with:
Detail Condition (32 Bit, internal value)
& FD_EXTENDED_MAP_1
FD_EXTEMDED_ACTIVE_1 (32 Bit)
FD_MAINT_ACTIVE (32 Bit)
Alarmbehandlung
FD_RECOMMEN_ACT
FD_CHECK_ACTIVE (32 Bit)
G01067
53