Medion MD 87309 Bedienungsanleitung Seite 46

 If possible, directly plug each Powerline Adapter
into its own wall socket.
 Switch on the computer and the router.
The setup process has been successful if all three LED
displays POWER, LAN and POWERLINE light
up on both Powerline Adapters.
the adapter into the network
NOTE
For this process, it is helpful to plug all of the
adapters, which are to receive the new network
key, next to each other in a multiple socket
adapter.
Proceed as follows for each additional Powerline Adapter
that is to receive the new network key:
All of the Powerline Adapters to be configured are
connected and ready for operation. The POWER LED
lights up.
 Connect the adapter that is to be used to extend
the network to a wall socket. The POWER LED
lights up.
 Press the SECURITY/RESET button on this
Powerline Adapter for approx. 5 - 8 seconds.
The device will be reset and then restarts. All LED
displays will briefly go out. This Powerline Adapter has
now generated a random, unique network key.
 Press the SECURITY/RESET button on the adapter
Integrating
DE
EN
FR
45 of 82