Before First Use; Mounting - Westfalia 82 60 24 Bedienungsanleitung

General Information
Remove the drill bit sharpener from the packaging and
check all parts for damage in transit.
For grinding bits you need a normal, firmly attached
grinding machine, (e.g. double grinder). Use a fine grind-
ing disc or a grinding disc for hard metal. Mount the drill bit
sharpener at the front of the grinding disc so that you can
easily guide the drill bit to the grinding disc.

Mounting

1. Firmly
machine, e.g. on a workbench.
Make sure that sufficient space
is available at the side of the
grinding machine for the instal-
lation of the drill bit sharpener.
In addition, the grinding disc
protective cover disc must be
shifted to enable the free part of
the grinding disc to be opposite
the drill bit sharpener.
The drill bit should be sharp-
ened by an area of the grinding
disc that is on the left of the drive hub of the machine
and which is preferably at the same level or slightly low-
er than the drive hub of the grinding machine.
2. Place the drill bit sharpener in parallel to the grinding
disc in front of the disc. Mount the drill bit sharpener
Correct Grinding
mount the grinding
12