Adam Equipment GFK Series Bedienungsanleitung Seite 13

EN
[Low It sets the limits for check weighing and
Limit] allows setting of either the low limit or the
high limit or both.
&
[High
Limit]
[ Lim] It stores and recalls any of 10 preset limits
[Func] This is used to select percent weighing, RS-
232 parameters, Operation of the bar
graph, RTC settings, User ID and Scale ID.
[Count] Enter Parts Counting
[Print] It is used to print the results to a PC or
printer using the RS-232 interface. It also
adds the value to the accumulation memory
if the accumulation function is not
automatic.
[1] to [0] Allow entering numerical values where
and [CE] required, setting of limits, tare value, time
and date for example.
© Adam Equipment Company 2011
None
None
None
None.
None
11 3056610542RevD-Aug11