What To Do In Case Of Alarm - brennenstuhl CM L 4050 Bedienungsanleitung

048316 CO-Melder CM L 4050.qxp_048316 BA_CO-Melder CM L
Operating Instructions
If the concentration increases during the mute
function, the function is overridden and the
detector sounds.
ATTENTION: If the CO-concentration is at
200 ppm, the mute function cannot be activated.
Warning when the battery is empty:
If the capacity of the battery decreases, the detec-
tor will beep once. The red FAULT LED will blink
every 30 seconds.
Error warning:
If the detector discovers an error, it will beep twice.
The red FAULT LED will blink every 30 seconds.
Warning at the end of the detector's service life:
If the CO detector reaches the end of its service
life, the green and red LEDs will blink and
the detector will beep every 30 sec.
If this happens, the detector has to be replaced.

4.5 What to do in case of alarm

NEVER IGNORE THE CO-ALARM
CO is called the »silent killer« because it is an
invisible, odourless and tasteless gas. It arises
from the incomplete combustion of fossil fuels.
26
CM L 4050