Mitsubishi Electric SEZ-KA35 Installationshandbuch Seite 10

8. Air filter installation
A
5
A
C
C
6
Fig. 8-3
B
Fig. 8-4
1
E
D
H
G
E
Fig. 8-5
10
2
1
4
5
4
3
A
E
1
D
2
F
A
2
F
A
F
8.3. Filter rail installation (Bottom air intake) (Fig. 8-3)
1. Transportation support remove (Throw away).
2. Please move the plate position. (Please use the screws removed.)
3. Please attach filter rail 2 as per the diagram (screw × 6).
Please connect rails 2 3 carefully.
4. Please attach filter rail 3 as per the diagram (screw × 6).
Please connect rails 2 3 carefully.
5. Clamp 5 (Attach the clamps 5 with screw × 2)
Upright position here.
6. Seal 6
Upright position here.
A Control box
C Air tight seal
Level with edge
8.4. Filter installation points (Rear air intake) (Fig. 8-4)
1. Insert the filter into rail 2
2. Hook the filter onto rail 3
A Control box
B Drain pan
D Filter
E Rail 2
F Rail 3
8.5. Filter installation points (Bottom air intake)
(Fig. 8-5)
1. Insert the filter into rail 2
2. Hook the filter onto rail 3
3. Bend the clamp to hold the filter.
A Control box
D Filter 1
E Rail 2
F Rail 3
G Bend
H Clamp 5