MIC Alarm-Washer Interface Unit
2
Unpacking
–
–
–
–
2.1
Parts List
Each device ships with the following parts:
–
–
–
–
–
2.2
Additional Parts/Tools Required
–
–
–
–
Bosch Security Systems
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative.
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
The original packing carton is the safest container in which to transport the unit and must
be used if returning the unit for service. Save it for possible future use.
Enclosure with three (3) watertight M16 cable glands and one (1) M16 blanking plug
installed
One (1) watertight M16 cable gland, uninstalled
Four (4) Pozidriv screws for lid
Four (4) screw caps to cover the lid screws
Installation Manual
Power source, 24 VAC, 50/60 Hz, 1A
#2 Phillips-head or Pozidriv screwdriver for the lid screws
Four (4) M4 (#8) mounting screws and washers
Screwdriver for the mounting screws
Installation Manual
Unpacking | en
7
2014.09 | 1.3 | F.01U.305.934