Optional Function; Heat Booster; Configuration Menu; Menu 1: Change The Sensing Mode - Tyco TC Installation Und Betrieb

Comfort mode
Reduced mode

4.2. Optional function

4.2.1 Activating Heat booster
This function is used for temporarily increasing of the floor/
room temperature by 5°C.
Activate booster Use <arrow> to select the <
Terminate
booster mode
4.2.2 Lock
Lock and unlock the thermostat
It is possible to lock all the parameters for the thermostat.
(e.g. public buildings)
Lock: Push simultaneously all buttons
Unlock: Push simultaneously all buttons

4.2.3. Configuration menu

Change various standard settings of the thermostat.
To enter following menu's push and hold the OK-button for
6 sec. Use the OK-button to step through the menu's.
Menu 1: Sensor mode
Manual continuous operation of the
comfort temperature (no program active)
Manual continuous operation of the
reduced temperature (no program active)
e.g. holiday period.
Press OK to activate.
Leave unit, as booster mode ends
automatically after 2 hours
Or leave <
mode by using <arrows>
Or press and hold <OK> for 3 seconds.
The sensor mode is detected and
initialised automatically. If the floor
sensor cable is connected, it operates
in floor sensor mode <
< >
> mode and go to another
>
>.
15