tfk T-44 Gebrauchsanleitung Seite 10

- (pic.VIII) Stick the rear carrycot tube (13) next to the plastic
part over the vertical frame tube in the middle. Now swing it to
the fixation (14) at the left vertical frame tube, it will lock
automatically (audibly).
- (Fig. IX) Now you can push the carrycot onto the two tubes
(11 + 13) from the front. First fix the clamps (15) onto the cot's
rear tube (13) and then use the front two
clamps (16) to press the carrycot down onto the cot's front
tube (11) from above. The clamps will lock automatically. To
remove the cot, pull on the front metal clip (4, Fig. III)
underneath the cot, then pull the cot towards you and off the
frame.
2. Use with two carrycots
- (pic.X) Remove the seat covers, belly frame and the
canopies (Please have a look to the instruction of the Twin).
Bring the front carrycot tube (17) in position next to the
pushbuttons left and right at the frame and push the clip at
the frame tube in the middle, till it is fixed. Close the bars at the
left and right end of the carrycot tube.
- (pic.XI) Plug the rear carrycot tube (18) first in the fixation
(14) at the left vertical frame tube. After that place it with the
clip over the frame tube in the middle and the right end of the
tube to the fixation at the right vertical frame tube. Push it till it
is audiable secured. Now you can fix the carrycots like it is
described in pic.IX. Take off the carrycot tubes
- (pic.XII) To remove the carrycot tube in front (11 + 17) open
the locks at the tube ends and pull it off. To remove the rear
carrycot tube (13 + 18) , open the bar (14) at the tube end in
the direction of the arrow and pull it towards you. Now you
can fix the seat covers, canopies and the belly frame.