Original Spare Parts And Accessories; Metrological Inspection; E General Provisions; Explanation Of Symbols - uebe 2105001 Gebrauchsanleitung

D

4. Original spare parts and accessories

The following original spare parts and accessories are available from specialist
dealers:
Cuff type H5 (for wrist circumference 12.5-21.5 cm)
Part no. 2105001, PZN 6414493
Subject to technical modifications.
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany

5. Metrological inspection

(previously calibration)
Basically, a metrological inspection is recommended at intervals of 2 years.
However, professional users in Germany have to comply with the aforementioned
according to "Regulation for Operators of Medical Devices". This can be imple-
mented either by UEBE Medical GmbH, an authority responsible for metrology, or
authorised maintenance services. For this, please observe your national provisions.
Upon request, responsible authorities or authorised maintenance services receive a
"Test instruction for metrological inspection" from the manufacturer.
Important: No modifications, e.g. opening the unit (except to replace the batteries)
may be made to this unit without the manufacturer's prior permission.
EN-50
Technical information General provisions

1. Explanation of symbols

This product complies with the Council Directive 93/42/EC from
5 September 2007 regarding medical devices, which became
0123
effective on 21 March 2010 and bears the mark CE 0123 (TÜV
SÜD Product Service GmbH). Units with CE marks are subject to
C
quality inspections in accordance with this Directive and provide a
Symbol Schutzgrad P2757C.ai 20.01.2010 09:22:19
M
higher level of accuracy than previous calibration.
Y
CM
Degree of protection against electric shock: TYPE BF
MY
CY
Please observe operating instructions
CMY
K
Storage and transportation conditions
Ambient temperature -5 to +50 °C
Protect against moisture/humidity
Rel. air humidity up to 85 %
Keep dry
Manufacturer

2. Disposal

Batteries and technical appliances must not be disposed of with
domestic waste, but should be handed in at the appropriate
collection and disposal points.
E
EN-51