Basic Operation Procedures - Tascam DR-40 Bedienungsanleitung

Press the + or − button to move the cursor and select
(highlight with light letters on a black background)
the language to be shown on the display.
English : use English
日本語 : use Japanese
Français : use French
Español : use Spanish
Deutsch : use German
Italiano : use Italian
Русский : use Russian
中文 : use Chinese
After selection, press the ENTER/MARK button to confirm it.
NOTE
You can change this setting with the SYSTEM
screen LANGUAGE item. (See "Quick reference for
using various functions" on page 17.)
Setting the built-in clock
When the unit is turned on for the first time (or when
the built-in clock is reset after being left unused without
batteries), the DATE/TIME screen appears before the
start-up screen to allow the date and time to be set.
Use the .// and +/− buttons to set the date and
time, and press the ENTER/MARK button to confirm.
Turning the unit off
Press and hold the (HOME) [8] button until
LINEAR PCM RECORDER appears on the display. The
unit turns off after it completes its shutdown process.
Connecting monitoring equipment
To listen with headphones, connect them to the
PHONES jack.
To listen with an external monitoring system
(powered monitor speakers or an amplifier and
speakers), connect it to the LINE OUT jack.
Powerd monitor speakers
Headphones
or amplifer and speakers
Attaching the tilt foot
When recording with the built-in mic, you can attach the
included tilt foot to the tripod mounting threads to prevent
the mic from being too low when placing the unit with the
bottom side (battery compartment cover side) down.
When not using the tilt foot, you can put it between
the two protrusions on the inside of the battery
compartment cover for storage and transportation.

Basic operation procedures

Press the MENU button to open the MENU
1.
Screen.
Use the + and – buttons to select (highlight)
2.
menu items, and press the ENTER/MARK
button to open setting screens.
Use the + and – buttons to select the setting
3.
item, and press the ENTER/MARK button.
Use the / or ENTER/MARK button to move
4.
the cursor to the right and highlight the setting
value.
Use the + and – buttons to change the setting.
5.
Press the . button to move the cursor left
6.
if you want to set a different item in the same
menu.
Repeat step 3 to 6 as necessary to set other items.
7.
When finished, press the
8.
button to return to the Home Screen.
TASCAM DR-40
(HOME) [8]
11