Mode Selection - Cameo PAR 64 Bedienungsanleitung

MODE SELECTION:

STATIC COLOUR MODE
Press the "MODE" button to select the Static Colour Mode. "C000", then
press the "ENTER" button to choose one of the static colours using the "UP"
and "DOWN" buttons. The "C1" represents Red, "C2" = Green, "C3" = Blue
and "CF" = strobe. The two digits after it are the brightness 00 to 99 or in
"CF" they are the strobe speed. Examples: If you set C1, C2 and C3 to zero,
the Tri Par will have no LEDs on (blackout). If you set C1 to 99 and C2 and C3
to zero, the Tri Par will be 100% Red.
RED
00 - 99 beam level adjustable.
GREEN
00 - 99 beam level adjustable.
BLUE
00 - 99 beam level adjustable.
STROBE
00 - 99 speed adjustable.
8