Axis Communications AXIS 5570e Installationsanleitung Seite 35

AXIS 5570e Installation Guide
Using the Test Button
The following operations can be performed by pressing the test button in specific sequences. Please refer to Product
Overview, to identify the location of the test button.
Print a Test Page
Press the test button once to print a test page.
Print a Server Report and Parameter List
Press the test button twice to print a list of all parameters.
Perform a Factory Default
1. Remove the power adapter to switch off the print server.
2. Press and hold down the test button, while you reconnect the power adapter.
3. Continue to hold down the test button until the network indicator remains constantly lit. This should take
about 20 seconds.
4. Restart the print server by disconnecting and reconnecting the power adapter
Important!
All parameters are reset to their default values when performing a factory default with the test button.
Installed certificates and keys are not affected by a factory default.
Please refer to the AXIS 5570e User's Manual for more information about the test button.
Page 35
.