Other Set - Samsung SCC-643(P) Benutzerhandbuch

6. OTHER SET

HOME RETURN
When there is no KEY input or other movement for a certain time, the
camera moves to the HOME location automatically. The HOME location
can be assigned from the HOME POSITION menu.
* * MAIN MENU * *
CAMERA...
VIDEO SET...
Press
PRESET...
AUTO MODE... [Enter]
ALARM SET...
OTHER SET...
SET UP TIME FOR HOME RETURN:
OFF: HOME RETURN function cancellation
OFF 1 MIN 2 MIN 3 MIN ~ 60MIN
HOME POSITION
You can select the HOME POSITION from the preset positions
numbered between 0 and 127.
AUTO FLIP
When operating the Tilt to the 90° limit using the Joystick, the camera
PAN automatically revolves 180° showing the opposite area of the Tilt area.
It gives the effect of extending the Tilt operating area 180°.
* * MAIN MENU * *
CAMERA...
VIDEO SET...
[Enter]
PRESET...
KEY
AUTO MODE...
ALARM SET...
OTHER SET...
3-22
(OTHER SET)
HOME RETURN 12HOUR
HOME POSITION 0
AUTO FLIP ON
PRIVACY ZONE ...
CAM RESET...
LANGUAGE ENGLISH
EXIT QUIT
~12HOUR
(OTHER SET)
HOME RETURN 12HOUR
HOME POSITION 0
AUTO FLIP ON
PRIVACY ZONE ...
CAM RESET...
LANGUAGE ENGLISH
EXIT QUIT
PRIVACY ZONE
Pan/Tilt position and the size of Masking area can be set for up to 8
privacy zones. When shooting the areas where privacy zones are set, the
relevant areas will be concealed from view to protect privacy.
Privacy Zones can be set as follows:
(OTHER SET) (PRIVACY ZONE MAP)
HOME RETURN 12HOUR 1* 2
HOME POSITION 0 5 6
AUTO FLIP ON
PRIVACY ZONE ... [Enter]
CAM RESET...
KEY
EXIT QUIT RET
Select PRIVACY ZONE and press the [Enter] key. The PRIVACY ZONE Map
appears and an asterisk "*" is placed next to the numbers set.
Use the [up, down, left, right] keys to select a number you want to set, and then
press the [Enter] key.
PRIVACY ZONE SET 1 PRIVACY ZONE SET 1
SET PAN/TILT ... SET PAN/TILT
SET AREA ... SET AREA
[Enter] KEY
Entering the
PAN/TILT
Setup Mode
SET LEVEL 1 SET LEVEL
EXIT QUIT EXIT
When the above screen appears, press the [Enter] key while the SET
PAN/TILT is selected to set the Pan/Tilt position. With OSD showing "SET",
use the Joystick move the Masking area to the center.
After setting the position, press the [Enter] key again to exit the PAN/TILT
position setup.
3 4
7 8
E
[Enter]
KEY
SET
...
[Enter] KEY
The PAN/TILT
Setup is
Complete.
1
QUIT
3-23