Station order setup
Your radio has 2 station order settings from which you can choose. The station order settings are
alphanumeric and ensemble.
Note:
The default station order on your radio is alphanumeric.
1. Press the Power On/Off button to switch on your radio.
2. Press the Source button to select DAB band.
3. Press and hold the Info/Menu button to enter the DAB menu list. The display will show "Full scan".
4. Rotate the Tuning control knob until the display shows "Station Order". Press the Tuning control knob
to enter the station order adjustment mode.
5. Rotate the Tuning control knob to choose "Alphanumeric" or "Ensemble".
"Alphanumeric" - sorts the station list alpha-numerically 0...9 A...Z.
"Ensemble" – organizes the station list by DAB multiplex.
The current setting is indicated by an asterisk.
6. Press the Tuning control knob to select the required station order.
Prune stations
If you move to a different part of the country, some of the stations which were listed may no longer be
available. Also from time to time, some DAB services may stop broadcasting, or may change location
or frequency. Stations which cannot be found, or which have not been received for a very long time are
shown in the station list with a question mark. The prune stations function will delete the marked DAB
stations from your station list.
1. Press and hold the Info/Menu button and the display will show "Full scan".
2. Rotate the Tuning control knob to find "Prune". Press and release the Tuning control knob to enter
adjustment mode. Then rotate the Tuning control knob to select "Yes" or "No". To activate the Prune
function select "Yes", and press and release the Tuning control knob to confirm the setting.
3. If you do not wish to prune stations, select "No" and then press and release the Tuning control knob.
Note:
If you have moved your radio to a different part of the country you should also carry out a search for new
stations (please see the section 'Finding new stations').
GB
8