Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.3. Group-Mode
Direct Group (DIR)
- Be intended for quick occasional readings. In this mode, data are temporarily
stored in RAM, it will be lost when power off. The readings and statistics can
be shown on the LCD. The RAM can store up to 80 readings. When the RAM
is full, measuring will continue, the oldest readings will be deleted mean while
the new readings is stored. Each new readings is stored, the statistics will be
upgraded and shown.
General Group (GENn: n= 1 to 4)
- In this mode, data are stored in memory and not lost when power off. The
memory can store up to 80 readings. When the memory is full, measuring will
continue, a "fl" will be shown on the left of readings, the new readings will not
be stored, and statistics will not be upgraded.
NOTE:
Each group (DIR or GEN) has individual high/low limit alarm, zero calibration and
multi-point calibration, and these settings will stored in memory when user changes
them.
Follow these steps to select the desired group mode:
to enter into menu-mode ("Root" directory)
1.)
Press
2.)
Press
3.)
Press
in.
4.)
Press
item and go back.
Note: The symbol „√ „ indicates current setting.
5.)
Press
to activate „Options" item and press
or
to activate „Group mode" item and press
or
or
to activate your intended item and press
to get back to measure mode.
-38-
to enter in
once to enter
once to select
Werbung
Inhaltsverzeichnis
