Safety Notes - Westfalia 33 70 71 Bedienungsanleitung

Please note the included General Safety Notes and the following
is
safety notes to avoid malfunctions, damage or physical injury:

Make sure the voltage corresponds to the type label on the unit.

Do not cut or saw where there may be hidden electricity, gas or water utility
services.

Only use saw blades that are suitable for this model. Do not cut with blunt,
damaged or bent saw blades. Make sure the saw blade is firmly tightened
before switching on the unit.

Do not attempt to cut workpieces so small that they cannot be securely
fastened. Do not support the workpiece with your hand or your foot. There is
danger of kick-back! Do not reach over the front of the unit or place either
hand in the vicinity of the saw blade, e.g. to remove lose splinters,
swarf/shavings or jammed workpiece fragments.

Always unplug the power plug when not in use, before maintaining or
changing the saw blade.

Only use extension cables which are approved for outdoor operation. Use
approvable extension cable with a cable quality of H07 RN-F; 3-1.5 mm
your electrician.

For using the unit, we recommend the use of an RCD with a residual current
< 30 mA. In Switzerland the utilisation of an RCD is obligatory.

Do not jam the cord or pull cord around edges. Do not pinch the power cord in
any way and keep it away from hot surfaces. Make sure the cord does not
become a tripping hazard.

Please wear mask and ear protection.

Safety Notes

3
2
. Ask