Product Description And Specifications; Technical Data - Bosch GAS 18V-1 Professional Originalbetriebsanleitung

OBJ_BUCH-3129-002.book Page 12 Friday, May 26, 2017 9:37 AM
12 | English
Product Description and Specifica-
tions
Intended Use
The vacuum cleaner is intended for vacuuming dry materials
that are not harmful to one's health.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Rotational Airflow
The bagless filter system removes the need to use dust bags.
Dirt is collected on the inside wall of the container.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Coarse dirt filter
2 Release button for dust cup
3 On/Off button
4 Handle
5 Battery pack*
6 Motor housing
7 Dust cup
8 Emptying flap release button
9 Emptying flap
10 Extension tube
11 Floor nozzle
12 Battery port
13 Battery unlocking button
14 Crevice nozzle
15 Flexible extension tube
16 Filter grips
17 Filter
18 Rotational Airflow unit with Filter
19 Filter locking tab
20 Wall bracket*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless dry vacuum cleaner
Article number
Container volume (gross)
*
Vacuum, max.
*
Airflow, max.
Weight according to EPTA-
Procedure 01:2014
Technical Data varies depending on filter used.
*depending on the battery pack being used
** limited performance at temperatures <0 °C
1 609 92A 3TD | (26.5.17)
Cordless dry vacuum cleaner
Permitted ambient temperature
– during charging
– during operation
storage
Recommended batteries
Recommended chargers
Operating duration per battery-
pack charge
Technical Data varies depending on filter used.
*depending on the battery pack being used
** limited performance at temperatures <0 °C
Assembly
Battery Charging
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery pack used in your vacuum cleaner.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The battery must be removed from the vacuum cleaner to
charge it.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Following the automatic shut-off of the vacuum clean-
er, do not continue to press the On/Off button. The bat-
tery can be damaged.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
GAS 18V-1 Observe the notes for disposal.
3 601 JC6 2..
Battery Insertion/Removal (see figures A1 – A2)
l 0.7  Do not use force to insert the battery. The battery is de-
signed in such a way that it can only be inserted into the
kPa 6
vacuum cleaner when it is in the right position.
l/s 10
– Slide the battery pack 5 all the way into the battery port
12.
kg 1.3
– To remove the battery 5, press the unlocking button 13 on
the battery and pull it out of the battery bay 12.
GAS 18V-1
°C 0...+45
**
and during
°C –20...+50
GBA 18V..
GBA 18V... W
GAL 18...
GAL 18... W
min/Ah
Bosch Power Tools
7