Frost Warning - Hama EWS-880 Bedienungsanleitung

• Alternatively, you can press the ALARM SET button (10) to display the alarm time (AL).
• Press the ALARM SET button (10) as needed to activate/deactivate the alarm.
• The alarm symbol (7) will either be displayed or not displayed accordingly.
• When the alarm is triggered, the alarm symbol (7) begins to flash and an alarm sounds.
• Press the ALARM SET button (10) to stop the alarm. Otherwise, it will stop automatically
after 2 minutes.
ote – Snooze function
N
• While the alarm is sounding, press the SNOOZE/LIGHT button (9) to activate the
snooze function. The alarm symbol (7) begins to flash on the display. The alarm is
stopped for 5 minutes, after which it will sound again.
• The snooze function can be used over a 24-hour period.
Celsius/Fahrenheit
• Move the °C/°F slide switch (12) to the °C or °F position to display the
temperature (3,4) in the respective unit.
6.4 Weather forecast
Note – Weather forecast
• Based on changes in the atmospheric pressure and the data saved, the base station is
able to make weather forecasts for the next 12 to 24 hours.
• The probability of an accurate weather forecast is around 70–75%.
10
• The weather forecast and the current weather are indicated by four different symbols (1):
Symbol (1)
6.5. Maximum and minimum temperature and humidity values
• The base station automatically stores the maximum and minimum outdoor/indoor
temperature values.
• Repeatedly press the MEM– button (15) to switch between the current temperature,
minimum temperature (MIN) and maximum temperature (MAX).
• The maximum and minimum values are displayed for 5 seconds.
• Press and hold the MEM– button (15) to reset the stored maximum and minimum values.

6.6. Frost warning

• If the outdoor temperature (3) is between -2°C and ~ 3°C, the frost warning symbol
appears on the LCD and flashes continuously.
• The frost warning symbol disappears once the temperature rises above this range.
Weather
Sun
Slightly cloudy
Cloudy
Rain
11