Fakir Starky HSA 252 Bedienungsanleitung Seite 24

GB
Ill. 2
Please align the stick-type charging
base with the groove of the
charging base, and insert it
downward until you hear a click
sound.
Abb. 3
Connect the small suction head to
the conection pipe. Insert the small
suction head set into the holder of
the charging base for use.
Abb. 4
24
Starky I HSA
Align the body set with the upper
protrusion edge of the electrical
soft roller brush, and insert it until
you hear a "click" sound.
Abb. 5
Align the slot at the rear of the
body with the upper protrusion
edge of the stick-type charging
base, and insert the body; besides,
keep the body stable to avoid the
body falls over.
Firmly insert the plug of the power
supply unit into the wall socket to
avoid the plug dropping off from the
socket; then, align the terminal of
the power supply unit with the slot
at the rear of the stick-type
charging base, and insert the
terminal upward to ensure the
safety.
Abb. 6
Rear of bar-type chargibg base
rear terminal
slot
Charger