Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
DESCRIPTION OF THE DEVICE
The device consists of the following main components:
Drawing 1
1.
Purifier
2.
LED displays speed 1-5
Drawing 2
3.
Adapter
4.
Adapter plug socket
5.
Purifier door
6.
Fragrance tray
Drawing 3
7.
On/Off Switch
8.
Button for power setting
9.
Button for timer
10. LED displays timer 2, 4 or 8 hours
11. Button for night mode
12. Pre-Filter
13. HPP™ Filter
14. Activated carbon filter
FIRST USE / OPERATION
1.
Place the air purifier on a flat surface in the desired area. Plug the adaptor (3)
into a suitable electric socket.
2.
Remove the activated carbon filter (14) from the polyethylene bag before operating.
3.
Then switch on the appliance by pressing the on/off switch (7).
4.
You can adjust the speed and thus the purification rate (volume per hour) by pressing
power setting button (8) (one blue lamp for level 1, two blue lamps for level 2, etc.).
5.
You can use the timer to set the desired cleaning time. To do this, press on the timer
button (9). You can choose between the following periods: 2 hours, 4 hours or 8 hours. If
you do not wish to use the timer, you may run the air purifier in continuous operation (no
LED lamps illuminated).
6.
If you find the lamps too bright (in a bedroom for example), you may reduce the light inten-
sity by pressing the night mode key (11). The night mode can be switched off by pressing
the key once again.
14
Werbung
Inhaltsverzeichnis
