Safety Instructions For Connecting Electricity - LG STYLER S3WERB Bedienungsanleitung

6 IMPORTANT SAFETY INSTRUCTIONS
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire,
explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
the product. Dripping wax, smoke, or fire
can result.
• Remove all protective vinyl film from
the product. Failure to do so can cause
product damage, smoke, or fire.

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

• Do not, under any circumstances, cut
or remove the ground prong from
the power cord. To prevent personal
injury or damage to the appliance, the
electrical power cord must be plugged
into a properly grounded outlet.
• This appliance must be plugged into
a 220-240 VAC, 50-Hz grounced outlet
protected by a 15-ampere fuse or
circuit breaker. Failure to follow these
instructions can result in fire, explosion,
or death.
• This appliance must be plugged into
a properly grounded outlet. Electrical
shock can result if the appliance is
not properly grounded. Have the
wall outlet and circuit checked by a
qualified electrician to make sure the
outlet is properly grounded. Failure to
follow these instructions can create an
electric shock hazard and/or a fire hazard.
• Install the appliance where the plug
is easily accessible. Unplug the
appliance when not in use to avoid risk
of fire or electric shock.
• Unplug the appliance before
disassembly or repair to avoid risk of
electric shock.
• The appliance should always be
plugged into its own individual
electrical outlet which has a voltage
rating that matches the rating plate.
This provides the best performance and
also prevents overloading house wiring
circuits which could cause a fire hazard
• The appliance shall be
installed in accordance
with national wiring
regulations.
from overheated wires.
• Do not use an extension cord to
connect to an outlet. Doing so could
result in a fire or electric shock.
• Never unplug your appliance by
pulling on the power cord. Always grip
the plug firmly and pull straight out
from the outlet. The power cord can be
damaged, resulting in a risk of fire and
electric shock.
• Contact LG or a qualified repair person
immediately to repair or replace all
power cords that have become frayed
or otherwise damaged. Do not use a
cord that shows cracks or abrasion
damage along its length or at either
end. The power cord can melt, creating
electric shock and/or fire hazard.
• When installing or moving the
appliance, be careful not to pinch,
crush, or damage the power cord. This
will prevent injury and damage to the
appliance from fire and electric shock.