Memory Reset; To Reset The Memory And Keep All Other Settings; Keylock Function; Technical Specifications - Albrecht AE 86 H Bedienungsanleitung

Memory Reset

It may be useful to erase the memories completely in one step, if necessary.

To reset the memory and keep all other settings

•
Press F
•
Release F and then keep BEEP pressed for at least 2 seconds
•
in the display rE SEt appears.

Keylock function

•
Press F + MONITOR
•
the key symbol appears
•
to unlock repeat the same procedure, the symbol will disappear
Display test mode
•
keep UP and LAMP pressed during power on. For a short moment, all display Icons will be on
for check.

Technical Specifications

Memory channels..................................................................................... .200 channels
Frequency Ranges
WFM:................................................................................................... 87.5 - 108 MHz
VHF:.................................................................................................... 144 - 174 MHz
VLB: .......................................................................................................66 - 88 MHz
AIR :..................................................................................................... 108 - 136 MHz
CB : ................................................................................................... .25 - 29.69 MHz
Typical Receiver Sensitivity at 12dB SINAD
87.5000 MHz- (WFM)
107.950 MHz (WFM)
108.050MHz (AM)
135.500MHz (AM)
144.020MHz (FM)
173.450MHz (FM)
27.405MHz (FM)
Scan rate ................................................................... 25 channels per second (Normal)
Search rate ...................................................................... 25 steps per second (Normal)
Priority sampling interval................................................................................2 seconds
IF Rejection.......................................................................................................65dB
1'st IF .......................................................................................................51.750MHz
2'nd IF.......................................................................................................... 450KHz
Internal audio output ..........................................................................1 Watt at 16 ohms
Internal speaker...........................................................dynamic 40mm diameter, 16 ohms
DC Current at closed squelch ...............................................................................35mA
Current drain with full audio output.................................................................max. 250mA
Battery power requirements ...............................................Alkaline AA x 3 or Mi-MH AA x 3
Antenna socket....................................................................... 50 ohms - BNC connector
External headphone socket...................................................................3.5mm Mono type
Weight ...................................................................110 g (without batteries and Antenna)
Size......................................................................56 mm (W) x 27 mm (D) x 106 mm (H)
Ext. DC power supply....................................................................8.....18 V DC, center +
DC charge current in MH switch position........................................................max. 150 mA
0.9 µV
0.9 µV
0.4 µV
0.4 uV
0.3 uV
0.3 uV
0.9 µV