Operation; Inserting/Changing The Battery - VOLTCRAFT 10 03 12 K102 Bedienungsanleitung

1. Data Hold display
2. Minimum value display
3. Maximum value display
4. Battery empty display
5. Minus temperature display

Operation

Inserting/changing the battery

The hand thermometer requires a 9V block battery to operate. When
the battery is empty the display "Low Batt" "
the LCD display. The battery will need to be replaced as a correct
display cannot be made when the battery is low.
The procedure for changing the battery is as follows:
- Disconnect the device from the temperature sensor/s and turn it
off.
- Open the battery compartment (10) by pushing the battery com-
partment cover towards the bottom.
- Remove the empty battery and replace it with a new battery.
- Replace the battery compartment cover.
Do not leave the battery lying around, there is a danger
that a child might swallow it. Batteries that have expired
or been damaged can cause skin burns. Do not throw
batteries into the fire!
Environmental notice
As the end user you are legally obliged (battery regulations) to return
all used batteries (including button cell and lead batteries); disposal
in household refuse is forbidden.
6. Automatic shut off display
7. Relative display
8. °C/°F – display
9. Temperature display channel1
10. Temperature display channel 2
(only K102)
" (4) will appear in
17