Pc Settings - Picture Position, Clock Phase, Sampling Clock, Reset - Toshiba Serie A3000 Bedienungsanleitung

PC settings – picture position, clock phase,
Picture position
Connect the PC (as shown in the 'Connecting a PC'
section) and ensure that a picture is showing on the
television screen. The picture position may now be adjusted
to suit personal preference.
Press to select PC, then select PC Setting
B
1
from the SET UP menu.
Language
Country
AV connection
PC Setting
Back
MENU EXIT
Press OK. Press up and down to select an option,
2
then left or right to adjust the settings.
PC Settings
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU EXIT
Clock phase
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press down until PC Setting
1
is highlighted.
Press OK to select, then down to highlight Clock
2
phase.
Use left or right to adjust until the picture clears.
3
sampling clock, reset
SET UP
English
UK
OK
OK
Watch TV
1/2
0
– 5
0
– 5
0
0
Watch TV
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press down until PC Setting
1
is highlighted.
Press OK to select, then down to highlight
2
Sampling clock.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU
Use left or right to adjust until the picture clears.
3
To return to the original factory settings.
In the SET UP menu press down until PC Setting
1
is highlighted.
Press OK to select, then down to highlight Reset.
2
Press OK.
3
NOTE: When a PC is connected using HDMI none of
these functions will be available.
22
Sampling clock
PC Settings
0
– 5
0
– 5
0
0
Watch TV
EXIT
Reset
1/2