Explanation Of The Symbols; General Safety Instructions For Power Tools - Batavia 7062244 Bedienungsanleitung

.
English

EXPLANATION OF THE SYMBOLS

WARNING – To reduce the risk of
injury during operation, read the
instructions.
Always wear hearing protection. The
effects of noise can cause hearing
loss.
Wear a dust mask. When working
with wood and other materials,
harmful dust may be generated.
Work with asbestos containing
materials is not permitted.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non­observance of the
instructions in this manual.
Wear protective footwear.
Wear safety gloves.
Electric power tool, protection class
II. This sign symbolises that this unit
corresponds to Protection Class II.
This means that the unit is equipped
with either reinforced or double
insulation between the mains circuit
and output voltage or metal housing
respectively
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Not for wet grinding.
CAUTION: LASER BEAM!
Do not look directly into the laser
beam.
20
7062244_MaxxSaw_Ma_#1503-19.indb 20
Voluntary test seal „Safety
Tested"
Do not point the laser beam at
humans or animals.
Do not dispose the electric power
tool with domestic refuse.
GENERAL SAFETY INSTRUCTIONS FOR
POWER TOOLS
WARNING! READ ALL
INSTRUCTIONS.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
injury.
Save these instructions for future
reference!
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated (cord-
less) power tool.
1. Work area
a. Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gasses or dust.
Power tools create sparks which may
ignite the dust of fumes.
c. Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs which
earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes, radi-
ators, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
c. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
27-08-15 09:42