Lap Recall; 6�4�1 Complete Records; 6�4�2 Sorting; 6�4�3 Maxima, Minima And Average - Conrad 860112 Bedienungsanleitung

6.4

Lap Recall

If no records are in the lap memory, only the "Mode" (B) button is
functional�
If lap records are stored they can be recalled�
6.4.1 Complete records
1� Press the "Start/Stop" (C) button to recall stored lap records beginning
from Lap No� 1 up�
2� Repeatedly press the "Start/Stop" (C) button until you reach the last
record� It will be marked by two short beeps�
6.4.2 Sorting
1� Press the "Split/Reset" (D) button to recall stored lap records beginning
from the fastest lap no� to the slowest�
2� Repeatedly press the "Split/Reset" (D) button until you reach the last
record� It will be marked by two short beeps� The "FIN" icon appears
in the LCD�
6.4.3 Maxima, minima and average
1� Press the "Select" (A) button to recall the fastest, average and slowest
lap records stored�
2� Repeatedly press the "Select" (A) button thrice to cycle through the
records� "Fast", "Slow" and "AVG" will be shown in the LCD�
6.5

Timer

The stopwatch possesses three timers using preset or user defined
programming�
TR1 Timer counts down marking the last 5 seconds with beep sounds and
emits a sequence of beeps (20s) upon reaching "0"� It repeats the count
down indefinitely in accordance with the time interval as initially set.
TR2 Timer counts down marking the last 5 seconds with beep sounds and
emits a sequence of beeps (20s) upon reaching "0"� It returns to the time
interval as initially set and stops�
TR3 Timer counts down marking the last 5 seconds with beep sounds
and emits a sequence of beeps (20s) upon reaching "0"� The timer will
then count up up to 23h 59min 59sec and when it stops on its own unless
otherwise stopped�
24